Startverfahren: | Hebelstart |
Drehzahl: | 210 - 650 min -1 |
Drehmoment: | 2.0 - 7.0 Nm |
Schraubengröße (Maschinenschraube): | 4.0 - 6.0 mm |
Schraubengröße (Blechschraube): | 4.5 - 8.0 mm |
Gewicht: | 630 g |
Spannung: | 24 V DC |
Leistungsaufnahme: | ca. 44 W bei (Rotation) |
DCC0241X-AZ | |
Input Voltage: | 100-240 V AC, 50/60 Hz |
Count Function: | Tracks screws fastened Workpiece detector can be incorporated |
External Start up Control Function: | Start up control can be enabled by external input signal |
Input Signal Method: | Photocoupler input (24 V DC drive (5 mA/1 input), NPN/PNP switchable) |
Output Signal Method: | Photocoupler output (30 V DC or less, 30 mA/1 output or less, NPN/PNP switchable) |
Service Power Source: | 24 V DC (Maximum capacity 200 mA) |
Serial Signal Method: | RS-232C |
ESD (Electrostatic Discharge) Protection: | Adopted (IEC61340-5-1 compliant |
Mass: | 1,8 kg |
Power Cord (Optional): | DLW9220 / DLW9240 / DLW9250 |